Skip to content

QR Codes for Construction Sites

Answer the neighbours’ questions on the board itself: who is building, what is allowed, when the noise stops and who to call.

Free plan: 3 dynamic codes and unlimited static codes · No credit card

This code is real. Point your phone camera at it.

The short answer

Put a dynamic QR code 15–30 cm (6–12 in) wide on the site board, read from the sidewalk at 1.5–3 m, linked to a project page with the permit, site contacts, working hours and how to raise a complaint. Use Q or H error correction because the board gets dusty, and keep any hazard stripes on the outer edge so the code’s blank border stays clean. Update the page as the job moves from phase to phase.

15–30 cmOn the site board
1.5–3 mRead from the sidewalk
Q or HError correction outdoors

How to put a QR code on a construction site board

  1. Write the project page

    Permit number and what it allows, the developer and contractor, a phone number that is answered, working hours, delivery times and expected end date. New York City began adding QR codes to building permits in 2011 so passers-by could see the approved scope of work and complaints; your page can answer the same questions.

  2. Create a dynamic code per site

    Name it by address. Add a second code at the gate for visitor sign-in or a safety briefing, so the public and the crew do not share one page.

  3. Use the Site board template

    It uses safety yellow with black and yellow stripes only on the outer edge, so the blank border around the code stays clean. Set error correction to Q or H in the editor for dust and weather.

  4. Mount it where people stop

    On the hoarding next to the gate, at eye level, out of the splash zone of passing traffic. Use matte weatherproof material, not glossy plastic.

  5. Update as the job moves

    Change the working hours, the contact or the next phase on the page. At completion, repoint the code to a handover notice or the building’s contact page.

Size, distance and placement

Best code type
Dynamic URL code per site; a second one at the gate for visitors
Site board
Read from the sidewalk at 1.5–3 m: 15–30 cm (6–12 in)
Gate sign-in
Read at about 1 m: 10 cm (4 in)
Error correction
Q or H, for dust, rain and scratches
Colours
In the US, OSHA 1910.145: caution signs are yellow with black lettering; safety instruction signs are white with a green panel
Stripes and quiet zone
Hazard stripes only on the outer edge; 4 modules of blank border around the code
Hard hat shape
Business, at least 6 cm wide, for site cabins and posters

Why a dynamic code on a site board

A site board stays up for the whole job, often a year or more, while the information behind it changes: working hours, the contractor’s contact, the phase, a road closure. A static code prints one address forever, so an outdated page stays on the street. A dynamic code lets you update the page or swap it for another without unbolting the board, and at completion you point it at the handover notice. Scan counts also show whether neighbours actually use it before they phone.

Common mistakes

Stripes running into the code.Black and yellow stripes inside the blank border confuse the scanner. Keep them on the outer edge.
A code at knee height on the hoarding.Nobody crouches on a sidewalk. Mount it at eye level next to the gate.
Linking to the contractor’s home page.Neighbours want this site’s hours and contact, not a company brochure.
Low error correction.Dust and scratches take out modules. Use Q or H outdoors.
Leaving the page unchanged for a year.Old hours and a departed site manager’s number make complaints worse. Review the page at every phase.

Tip: if your local authority already publishes the permit online, link to that record from your page as well. Neighbours then see your contact details and the official record in one place.

Frequently asked questions

What should a construction site QR code link to?

A page for that site with the permit and what it allows, the developer and contractor, a phone number that is answered, working hours and how to raise a concern.

How big should a QR code be on a site board?

Divide the reading distance by 10: from a sidewalk 1.5–3 m away, 15–30 cm (6–12 in) wide.

Which colours should a construction QR sign use?

Keep the code dark on light. For the sign around it, OSHA 1910.145 in the US sets caution signs as yellow with black lettering and safety instruction signs as white with a green panel; follow your local rules elsewhere.

Can I reuse the code after the building is finished?

Yes, if it is dynamic: point it at a handover notice, the building management contact or your next project.

Start with a free code.

Free plan: 3 dynamic codes and unlimited static codes · No credit card

Start free →

Last reviewed: October 2026